ISP TECHNOLOGIES PRO AUDIO

ISP Pro Audio

HIGH DEFINITION MONITOR 210™

The highest output you can pole mount!

900 watts RMS.

Two 10 inch neo woofers, dual compression mids, 1.75 inch neo HF driver.

Floor wedge or pole mount.

Description
– High output, high resolution, compact three-way active system
– Pole mount, floor wedge, or ground stack use
– Lightweight neodymium drivers provide highest output-to-weight ratio
– Dual 10 inch woofers provide higher resolution and output than a single 15
– Dual compression midranges provide higher resolution and output than a cone midrange
– 1 inch throat high frequency compression driver for extended, detailed highs
– 600+200+100 Wrms 3-channel amplifier with electronic crossover included. No digital processor needed.

Made with Baltic Birch

Specifications
Configuration: 3way
LF Driver: 2 x 10 inch, neodymium, 600 W rms, vented.
MF Driver: 2 x 2 inch compression drivers on CD horn.
HF Driver: 1.75 inch v.c. compression, 60 W rms, polyester diaphragm, on CD horn.
Coverage: 90 degree Horizontal x 45 degree Vertical.

Construction: Baltic Birch Plywood. Powder coated Steel grille.
Finish: Black rubberized polyurethane, custom paint available.
Connector: XLR for audio input. Neutrik PowerCon ™ for AC power.

Dimensions: 30.7” H x 17.7” W x 16.3” D
Weight: 73 Lbs.
Amplifier: 600+200+100 W rms, 3 channels, high current DCAT™,fan cooled, Built-in electronic crossover (4th order).
Power Required: 7.5 Amps x 120 VAC.

Freq. Range: 62 Hz to 20 KHz (-10 dB)
Freq. Response: 90 Hz to 19 KHz (+- 3 dB)
Axial Output Limit: 127 dB (average), 133 dB (peak)

System Capabilities